For architects and specifiers

Specify Fieldhouse.

Everything a project manual and a drawing set need, with no quote in the way: Section 10 51 16, the drawings as DXF, every published size, the materials and certifications, and a person to send the Word file and answer questions. Every dimension here comes from the same geometry the shop builds from.

Download the section (PDF) → Request the Word file →

Documents

The section and the drawings.

10 51 16The CSI sectionRead it on the web: three parts, every project decision in brackets.PDFDownload the sectionThe same section as a PDF, ready for the project manual.WordRequest the Word fileThe editable section. Ask below and a person sends it.DXFDrawing libraryElevations, plans, sections and room plans. R12 ASCII, inches.Drawing engineDraw any sizeEvery view the model produces, at any published size, as SVG or DXF.ADAAccessible openingsWhat moves on an accessible opening, and what it costs that opening.

Sizes

What the line builds.

Five families on one 72″ carcass. Widths and depths are the published sizes; anything between them is a custom size, drawn and quoted with the job.

FamilyWidthsDepthsCarcassOverall MaterialFrontBase
T1 SPRINTTrack & field, cross country, tennis, golf, cheer 12″, 15″18″, 20″ 72″80″ HPLOpen 4" integrated kick base
T2 DECKSwim & dive, water polo, wrestling, rowing 12″, 15″18″, 20″ 72″72″ PhenolicOpen, wet-area Rail on four 6″ aluminum legs
T3 ANCHORBasketball, volleyball, soccer, lacrosse, baseball, softball 18″, 24″20″ 72″80″ HPLOpen 4" integrated kick base
T4 GAUNTLETFootball, ice hockey 24″, 30″24″ 72″80″ HPLOpen 4" integrated kick base
T5 ROTATIONPE & intramural, visiting teams 12″, 15″, 18″18″ 72″76″ HPLDoors, two tiers 4" integrated kick base
Bench seat

1-1/2″, two layers of the body laminate glued up. A center divider is standard under an open seat at 30″ and an option at 24″.

Hanging

Jersey rod at 20″ depth and deeper; coat hooks below that. Bag sports drop the rod and lower the hooks to 44″.

Accessible openings

Operable parts move into the 15–48″ forward reach range on the accessible opening. What it costs that opening →

Materials and certifications

What they are made of.

HPL · T1, T3, T4, T5

High-pressure laminate

Body
3/4″ high-pressure laminate over moisture-resistant particleboard or MDF core
Back
3/4″
Fronts
3/4″
Core
ANSI A208.1 Grade M-2 moisture-resistant particleboard, or ANSI A208.2 Grade 130 MDF
Grade
NEMA LD 3, GP-50 vertical / HGS horizontal grade
Edges
1 mm PVC

Impact and abrasion resistance for a room that takes cleats, carts and shoulder pads.

Phenolic · T2

Solid phenolic (compact laminate)

Body
5/16″ solid phenolic compact laminate, through-color, self-supporting with no substrate
Back
5/16″
Fronts
5/16″
Core
None — phenolic-impregnated kraft core, compression molded
Grade
NEMA LD 3 / ISO 4586, Class B flame spread per ASTM E84
Edges
machined and eased — no applied banding

No core to swell. Specified where the floor is hosed and the air stays wet.

Doweled and glued construction1 mm PVC edge banding Certifications and warranty confirmed per quote Manufactured by Hamilton Casework Solutions

The Word file, or a question

Ask a person.

Tell us what the project needs — the editable Word section, or an answer about the specification — and a person replies. If your firm works through a Hamilton dealer, they can help too.

We use this to answer you. We do not sell it and we do not add you to a list.

What do you need?